Description
Peterson Pry Bar – 0.050
Who says you can’t please everyone? When several locksmiths felt our original pry bar was too thick for some of their needs, we did just that.
The Peterson Pry Bar is for the many locksmiths who requested a strong and solid tension tool for applying “top of the keyway” tension.
At 0.050,” our “Serrated Pry Bar” is the width of the key blade segment of most key ways.
It is notched to eliminate contact with the first pin, flat to fit in your pick set, and has our serrated edge technology that locks it in any keyway!
It is made from the same Government Stainless Steel that made the original pry bar such a hit in the field.
Please Note: These tools have a small “nub” midway on one side of the approximately 0.156 wide central widths of the tool. This is the remnant from a “laser tab” created to hold the part in the sheet when the parts are laser cut. Our polishing tumbler rounds and smooths this tab to a very small smooth rounded lump typically protruding out of the side about 0.015 (15 thousandths, about the thickness of a matchbook cover). Most of our customers don’t find any issue with this small inconsistency on one side of the otherwise perfectly straight edges of the tool.
But we are tumbling them longer to reduce the nub somewhat. This also reduces the tooth projections, but they still lock in nicely.
